İhlas Aura Cebilon Unique - Manual (Page 14)

14
Filter Name Part Code
5 micron sediment
filter
Carbon filter
1 micron sediment
filter / carbon filter
Mineral carbon filter
Membrane
350010Z
350002Z
350003Z
340005Z
349004Z
Replacement Period
6 months or 1500
galons
6-12 months or
3000 galons
6-12 months or
3000 galons
6-12 months or
3000 galons
2 – 5 years 6000
galons
Regulates the pH by supplying mineral to water.
This is where Reverse Osmosis occurs. Life of the filter will change depending on the
ion concentration in the mains water, amount of the distilled water and whether the
maintenance is carried out in a timely manner.
Duties
Sediment filtration is performed by taking coarse particles in water. Clears the
water at a micron level. Its life varies depending on the nature of the inlet water.
Keeps all the gas in water chemically in itself. The excess chlorine reduces the life of
the carbon filter. Timely replacement protects from damage of chlorine and extends
the life of the membrane filter.
This filtration is performed by taking coarse particles in water. Clears the water at a
micron level. Its life varies depending on the nature of the inlet water.
* Efficiency rating means the percentage of the influent water to the system
that is available to the user as reverse osmosis treated water under operating
conditions that approximate typical daily usage.
** Recovery rating means the percentage of the influent water to the
membrane portion of the system that is available to the user as reverse
osmosis treated water when the system is operated without a storage tank or
when the storage tank is bypassed
Have timely periodic maintenance of your appliance to use your system
efficiently and for longer time. The following replacement periods are the
recommended durations for appliances used in mains water under normal
conditions. The usage condition of your appliance may change depending on
the properties of inlet water, amount of chlorine and sediment.Our autho-
rized services will perform periodic maintenance required for your system to
work efficiently every six months.
Daily capacity, efficiency rating and recovery raiting for 101ME model
Recommended filter
replacement periods
# Max. pressure matches the structural integrity test value of NSF/ANSI Standard 58 for 101ME model
Daily Capacity 75.15 gpd (284.47 L/day)
Efficiency Rate(*) 30.93%
Recycling Rate (**)
Operating Pressure (min-max)
Operating Temperature (min-max)
Ph Range
3-11
Maximum Fe (Iron)
Maximum TDS
1250 (ppm=mg/L)
Turbidity 5 NTU
Hardness 17 °Fr-10 °dH -170 mg/LCaC03
34.89%
40-145psi / 2.8-10 bar / 275-1.000 kPa
5-38°C/38-100°F
0,2 (ppm=mg/L)