Sundance SMT166 - Manual (Page 10)

4.2 Module Description
4.2.1 Connectors available on the board
4.2.1.1 SLB connectors and cables
SLB sites can receive SLB mezzanine modules. Connections are made via power and
data SLB connectors (Samtec connectors).
Shown below is an example SLB module. This is the SMT909 composite video input
module.
A fifth SLB data connector is available (not coupled with a power connector). Half of
the IOs are connected to the first FPGA and the second half to the second FPGA.
They can be used as general purpose IOs or be connected to the Master Module by
using an SLB cable.
The mounting posts and securing bolts for the SLBs and TIM are at 3.3V NOT GND.
Product Specification SMT166 Page 10 of 44 Last Edited: 17/06/2014 16:12:00