IDK VAC-1000HD - Manual (Page 34)

VAC-1000HD User’s Guide
34
7.3 Checking operation (Maintenance menu)
You can set necessary items for operation verification.
This menu is enabled and displayed by setting [F99] to “on” or “ALL”.
7.3.1 [C01] Setting HDCP input
Some source devices check whether the connected device supports HDCP and then those source devices
decide whether they encrypt HDCP signals or not.
Since the VAC is HDCP compliant, if it is connected to a display device that does not support HDCP, video
may not be displayed. In these cases, the problem can be solved by setting this menu to “oFF”.
HDCP-
supported
computer
Video cannot be
displayed
Video can be
displayed
HDCP-non-supported
display device
HDCP-supported
display device
HDCP-non supported/
supported display device
Video can be
displayed
VAC-1000HD
HDCP setting: OFF
VAC-1000HD
HDCP setting: ON
Video with
copyright
protection
Video without
copyright
protection
ON
OFF
DISTRIBUTIO N AMPLIFIER for HDMI VAC-1000HD
POWER SIGNAL
ON
OFF
DISTRIBUTIO N AMPLIFIER for HDMI VAC-1000HD
POWER SIGNAL
[Fig. 7.6] HDCP-supported and HDCP-non-supported display devices
Setting values
on: Enable HDCP encryption [Default]
oFF: Disable HDCP encryption
Note: In order to display video whose copyright is protected, set this menu to “on”.