Formax 2200 Series - Manual (Page 94)

Operator's Manua l 2200 Series Automatic Setting
Menu Service
The service menu can also be used to check the basic setting of the paper thickness
sensor.
BASIC SETTING
ZERO POINT PAPER SENSOR
ZERO POINT ( in ): 0.00
The zero point of the paper thickness sensor is adjusted by the service technician
when first installing the machine.
It is possible that the value changes slightly in the course of time, for example
because the ambient temperature is not constant.
This has no influence on the function.
If, however, values above +0.30 or below -0.09 are displayed, the sensor
must be readjusted. The instructions are part of the machine documentation
that can be found in the control box.
This is indicated on the display when the double sheet detection is
being activated.
3. Press key C Back to BASIC menu.
1. Press key F12 The SERVICE menu is displayed.
2. Press key F6
94