Formax 2200 Series - Manual (Page 37)

Operator's Manual 2200 Series Automatic Setting
F1 F5 F2 F3 F4
Description of the
Display The operator panel contains an LC-display.
After switching on the machine, the following message appears:
This display gives an overall view of the most important data.
For this reason the
BASIC menu should always be called up when running the folder.
The displays for TOTAL, OUTPUT, REMAINDER, DOUBLES, TRANS-
PORT always refer to the actual folding job.
The JOB NO may refer to the actual folding job, but this is not necessarily
the case.
When calling up the menu, the job number which was saved last or which
was recalled from the memory is automatically displayed.
A job which was not saved cannot have an identification number and is
therefore not displayed.
The following main menus can be chosen from the BASIC menu:
• COUNTER Setting of total and batch counting
• MONITORING Activation of double sheet detection and paper travel control
• SET-UP Automatic setting of fold lengths / Input of setting infor-
mations
• SAVING Saving of repetitive jobs
• JOB Actual folding job
A number of function keys ( F1 to F7 ) with arrows pointing to the headlines of
the main menu are grouped around the display.
By pressing one of these keys, the selected main menu is displayed.
TOTAL: JOB NO:
OUTPUT:
REMAINDER:
MONITORING:
DOUBLES:
TRANSPORT: OFF
OFF
00000
0000
0000
00000000
/h
MONITORING SAVING
COUNTER SET-UP JOB
37