Formax 2200 Series - Manual (Page 5)

1. GENERAL
Function The 2200 Series folder / sealer folds and seals many different
pressure seal mailer confi gurations including, “C”, “Z”, “V” and
custom folds. All of these fold confi gurations can automatically be
selected from the control panel. The 2200 Series can also process
several different sizes of forms. For confi gurations and / or paper
sizes see listing under specifi cations below. There is a choice
between suction- and fl at pile feeders.
The infeed rollers (1) and (2) transport the
sheet to be folded into the fold plate (3).
As soon as it comes up against the adjustable
stop (4), the sheet forms a buckle (5) because
the infeed rollers keep on moving.
The loop gets bigger until the sheet is seized
by rollers (2) and (6); this is where the actual
fold occurs.
The rollers draw the folded sheet from the fold
plate and the infeed rollers and move it on.
The clearence between the upper and lower rollers is enough to
allow the documents to pass between the rollers while still appling
enough pressure to activate the pressure sensitive glue.
Fold Principle
Sealing Principle
Operator's Manu al 2200 Series General
5