Introduction – Paxton Superchargers Universal Big Block Mopar 440 Carbureted System User Manual

Page 9

P/N: 4809662

02NOV10 v2.0

Section 1

INTRODUCTION

ongratulations! You have purchased the fin-

est street Supercharger available. The center-

piece of this kit is the highly efficient and

reliable Paxton Automotive Corp. NOVI-1500

supercharger. A mechanically driven (by belt) cen-

trifugal blower (supercharger).

This kit comes with all of the parts you’ll need for

a successful installation. The operations required

have been grouped in order of sequence. Photos

and drawings accompany the text, allowing quick

orientation and parts identification.

Installation requires a selection of tools which are

listed on page vi.

We also suggest that you obtain a shop manual and

become familiar with the details of your cars sys-

tems.

For best results follow the instructions closely and

in sequence. The average installation time for this

kit is 6 hours. Your actual installation time will

depend on skill level and working conditions. The

estimate does not include time for initial vehicle

inspection, cleaning, fine tuning or troubleshooting.

Before even picking up a wrench, read this entire

manual. We are available for technical assistance at

(805) 487-3796, 8am-4:30pm pacific time.

After reading the manual, verify that all major

assembly groups are present in the main kit box.

You should have ample space to layout the compo-

nents. As you remove a box or bag from the main

kit, note the identification label and compare it

with the parts list. Please check the box for small

parts.

Paxton makes every effort to insure that all parts

are included in the box. However, if you discover

any missing or mislabeled parts, please contact

Paxton by phone for service.

*** WARNING ***

DO NOT attempt installation if any part(s) are missing

from this kit. Failure to contact Paxton prior to beginning

installation will result in a charge for any missing parts.

Before starting the installation, we suggest your

engine compartment be clean. You can clean the

engine and compartment with a pressure washer

(such as those used at self serve car washes) and a

safe-for-aluminum cleaner/degreaser. Cover the

distributor with a plastic bag to prevent water from

entering.

*** CAUTION ***

We do not recommend proceeding with the kit installation

unless your vehicle is within normal operating parame-

ters.

You are undoubtedly enthusiastic about getting

started on your project, but take just a little more

time to insure that your safety is not jeopardized. A

moment’s lack of attention can result in an acci-

dent, as can failure to observe certain simple safety

precautions. The possibility of an accident will

always exist, and the following points should not

be considered a comprehensive list of all dangers.

Rather, they are intended to make you aware of the

risk and to encourage a safety conscious approach

to all work you do on your vehicle.

We look forward to hearing from you, particularly

if you have any comments or suggestions regarding

this manual at:

(805) 487-3796

Paxton Automotive Corporation

1300 Beacon Place

Oxnard, CA 93033

E-mail Address [email protected].

*** NOTE ***

Throughout these procedures the word “discard” is used

periodically in relationship to items that will no longer be

utilized in conjunction with the supercharger installation.

It is recommended that these items be saved for future use

should it become necessary.