Paxton Superchargers Universal Big Block Mopar 440 Carbureted System - Manual (Page 25)

17
P/N: 4809662
©2009 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
02NOV10 v2.0
7.1 AIR INLET dUCTING INSTALLATION
Fig. 7.1-a
A. Locate the Air Inlet Assembly
B. Install the 3.75" end of the 3.75”to 4.00”
reducer sleeve onto the supercharger inlet
and secure using the #60 hose clamp provid-
ed.
C. Install the 4” inlet duct into the sleeve previ-
ously installed and secure using the remain-
ing #64 hose clamp.
D. Secure the supplied filter to the open end of
the inlet duct. (See Fig. 7.1-a.)
Section 7
AIR INLET DUCTING INSTALLATION