Foreword – Paxton Superchargers Universal Big Block Mopar 440 Carbureted System User Manual
Page 2

ii
P/N: 4809662
©2009 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
02NOV10 v2.0
© 2010 PAXTON AUTOMOTIVE
All rights reserved. No part of this publication may be reproduced, transmitted, transcrived, or translated into another language in any form,
by any means without written permission of Paxton Automotive.
NOTES
•
The crank pulley supplied with this kit is designed to accomodate the stock
water pump pulley, alternator and power steering. Vehicles with different
accessories may need custom spacing or elimination of some accessories.
• Due to the many possible engine configurations and boost requirements, a
standard supercharger pulley has been included in this kit.
FOREWORD
Take note of the following before proceeding:
1. Proper installation of this supercharger kit requires general automotive mechanic
knowledge and experience. Please browse through each step of this instruction
manual prior to beginning the installation to determine if you should refer the job
to a professional installer/technician. Please contact your dealer or Paxton
Automotive for possible installers in your area.
2. This product was designed for use on stock (un-modified, OEM) vehicles. The carburetor,
engine, transmission, drive axle ratios and tire O.D. must be stock. If the vehicle or engine has
been modified in any way, check with Paxton prior to installation and use of this product.
3. Use only premium grade fuel with a minimum of 91 octane (R+M/2).
4. Always listen for any sign of detonation (knocking/pinging) and discontinue hard use (no boost)
until the problem is resolved.
5. Paxton is not responsible for any clutch, transmission, drive-line or engine damage.
Exclusions from Paxton warranty coverage considerations include, but
not limited to:
1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation.
2. Continued operation with an impaired vehicle or sub-system.
3. The combined use of Paxton components with other modifications such as, but not limited to,
exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM programming or other
such changes.
T
his manual provides information on the installation, maintenance and service of the Paxton
supercharger kit expressly designed for this vehicle. All information, illustrations and specifi-
cations contained herein are based on the latest product information available at the time of
this publication. Changes to the manual may be made at any time without notice. Contact Paxton
Automotive for any additional information regarding this kit and any of these modifications at (805)
888-PAXTON 8:00am-4:30pm PST.