Paxton Superchargers Universal Big Block Mopar 440 Carbureted System User Manual

Page 24

P/N: 4809662

02NOV10 v2.0

6.3 BELT INSTALLATION

A. Start by adjusting the tensioner idler previ-

ously installed on the dual bracket, all the

way up to the highest point.

B. Next route the supplied 10 rib serpentine belt

around the newly installed crank drive pulley

and up around the supercharger drive pulley

making sure the belt is routed underneath the

tensioner idler attached to the tensioner plate.

C. Adjust the tensioner by torquing the tensioner

screw so that idler pulley is lowered onto the

drive belt applying tension.

D. Once adequate tension is applied lock the

tensioner in place by finally tightening the

jam nut on the tensioner arbor previously left

loose for adjustment purposes. (See Fig. 6.3-

a.)

Fig. 6.3-a