Paxton Superchargers Universal Big Block Mopar 440 Carbureted System User Manual

Page 3

iii

P/N: 4809662

02NOV10 v2.0

***IMPORTANT NOTES ***

The following carbureted base system support parts are not included as part of the system but are

available from Paxton Automotive:

1. Race Bypass P/N 8D204-010 is included in the 1201860(P) systems and is required for applications exceed-

ing 5psi. A larger compressor bypass valve and flange is required on applications exceeding 10 psig boost /

600HP. Contact the technical department to determine the proper valve selection for the application.

• Paxton # 8D103-001 Mondo Race Bypass Valve

• Paxton # 8D003-052 Mondo Race Bypass Valve weld-on flange (aluminum)

• Paxton # 9AT200-090 Tube, aluminum Ø2.0" x specify length (for welding 8D004-052 to round tube)

• Paxton # 8D205-003 BV57 Bypass Valve (Includes V-Band Clamp and O-ring Seal)

• Paxton # 8D005-051 BV57 Bypass Valve weld-on flange (aluminum)

2. Boost referenced ignition/timing retard system.

• Paxton # 5A001-001 Stand alone ignition retard “MSD” (not an ignition enhancer)

3. Supercharger pulleys: (Contact technical department for proper appication match)

• Paxton # 4MA031-312: 3.12" Diameter 10-rib driven pulley

• Paxton # 4MA031-333: 3.33" Diameter 10-rib driven pulley

• Paxton # 4MA031-348: 3.48" Diameter 10-rib driven pulley

• Paxton # 4MA031-360: 3.60" Diameter 10-rib driven pulley

• Paxton # 4MA018-041: 6.00" Diameter 10-rib drive (crank) pulley

• Paxton # 4MA018-061: 7.80" Diameter 10-rib drive (crank) pulley

Items to be supplied by installer/end user:

• Carburetor with mechanical secondaries (4150 Holley/Barry Grant MD style)

• High performance electric fuel pump

• Boost referenced fuel pressure regulator