Pilz PSSu E S 2AI RTD - Manual (Page 28)

Wiring
Operating Manual PSSu E S 2AI RTD(­T)
22017­EN­06 28
} On base modules with screw terminals:
– If you use a multi­strand cable to connect the I/Os, it is recommended that you use
ferrules conforming to Parts 1 and 2 of DIN 46228, 0.14 ... 1.5 mm
2 , Form A or C,
although this is not essential. To crimp the ferrules you can use crimp pliers (crimp
form A or C) conforming to EN 60947­1, such as the PZ 1.5 or PZ 6.5 from
Weidmüller, for example.
– Maximum torque setting: 0.8 Nm
} Use copper wiring.
6.2 Terminal configuration
Base module Terminal configuration
Screw terminals:
PSSu BP 1/12S
PSSu BP 1/12S­T
Cage clamp terminals:
PSSu BP 1/12C
PSSu BP 1/12C­T
Without C­rail:
11: Input R0+
21: Input RL0+
12: Input R0­
22: Input RL0­
13­23: Cable shield
(13­23­16­26 linked within
the base module)
14: Input R1+
24: Input RL1+
15: Input R1­
25: Input RL1­
16­26: Cable shield
(13­23­16­26 linked within
the base module)
21 11
22 12
23 13
24 14
26 16
25 15