Pilz PSSu E S 2AI RTD - Manual (Page 22)

Installation
Operating Manual PSSu E S 2AI RTD(­T)
22017­EN­06 22
5 Installation
5.1 General installation guidelines
Please also refer to the PSSuniversal Installation Manual.
CAUTION!
Damage due to electrostatic discharge!
Electrostatic discharge can damage components. Ensure against discharge
before touching the product, e.g. by touching an earthed, conductive sur­
face or by wearing an earthed armband.
5.1.1 Dimensions
Base modules with six connection levels:
12,6 mm
76 mm
52,1 mm 8,1 mm
67,7 mm
82,0 mm
71,8 mm
0,8 mm
72,6 mm
(2.051") (0.319")
(2.858")
(0.496")
(2.99")
(3.228")
(2.827")
(0.031")
(2.665")
12,6 mm
(0.496")
154,6 mm (6.087")
5.2 Installing the base module
Prerequisite:
} The head module must be installed.
} If the head module does not have an integrated power supply, a supply voltage module
must be installed to the right of the head module.