Lingenfelter L460330000 Micro Storm MS-001 2-Stage Dual Ramp Progressive Nitrous Controller v 2.6 User Manual
Page 9
9
Dual ramp optional parameters:
25—Nitrous Final Percent2—Stage1: This setting controls the final or maximum nitrous power applied if
the “Dual Ramp” feature is ON. The nitrous power ramp will be the start percentage to final percent #1, final
percent #1 to final percent #2. The ramp time is controlled by the build time #1 and build time #2 settings.
The progressive ramps can be programmed to increase or decrease the nitrous power.
Valid range is 10% to 100% in 1% increments.
26—Nitrous Build Time2—Stage1: This setting controls the time it takes stage1 to go from final percent #1
to the final percent #2. A shorter time (example 0.2 second) will create a very aggressive ramp and a longer
time (example 9.9 seconds) will create a smoother application of power.
Valid range is 0.0 second to 9.9 seconds in .1 second increments.
27—Nitrous Final Percent2—Stage2: This setting controls the final or maximum nitrous power applied if
the “Dual Ramp” feature is ON. The nitrous power ramp will be the start percentage to final percent #1, final
percent #1 to final percent #2. The ramp time is controlled by the build time #1 and build time #2 settings.
The progressive ramps can be programmed to increase or decrease the nitrous power.
Valid range is 10% to 100% in 1% increments.
28—Nitrous Build Time2—Stage2: This setting controls the time it takes stage2 to go from final percent #1
to the final percent #2. A shorter time (example 0.2 second) will create a very aggressive ramp and a longer
time (example 9.9 seconds) will create a smoother application of power.
Valid range is 0.0 second to 9.9 seconds in .1 second increments.