Lingenfelter L380xx1410 Lingenfelter Camaro Cast 241 MM Aluminum Differential 2010-12 v1.9 User Manual

Page 12

Page

34. Use the axle protection tools (PN’s

J-44394, DT-48877) to separate the axle from

the differential. Tool J-44394 is used for the

passenger side axle while tool DT-48877 is

used for the driver side axle. If these tools are

not available, gently pry the axle away from the

OEM differential. If using the prying method,

take caution not to damage the shaft, shield, or

seals. Do this to both the driver and passenger

side of the vehicle.

35. Pull the axle away from the differential and

remove it as shown. Do this to each side of the

vehicle.

11.

33. Using a 18mm socket, ratchet and wrench,

remove the upper control arm bolt and nut on

each side of the vehicle.

32. Using a 18mm deep well socket and

ratchet, remove the bolts holding the stabilizer

bars in place on each side.