Instrument, Icoupie - : coupie, Mode – Anritsu MP1777A User Manual
Page 84: Instrument : coupie
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8.3 Device-Specific Commands
8.3.1 INSTrument Subsystem
The INSTrument subsystem is used to specify the same setting for the transmission and reception or independent setting
for each.
INSTrument
iCOUPIe -
: COUPIe?
: INSTrument : COUPIe
Command type
Sequential command
Parameter
ALL.............. Tx&Rx (Same)
NONE........... Tx/Rx (Independent)
Function
Specifies the selection of whether to establish the same setting for the transmission and
reception modules or independent setting for each.
Restriction
When the mode is switched from Tx/Rx to Txr&Rx, the set value for Rx is set for the Bit
Rate.
Example of use
Sets the same setting for the transmission and reception.
> : INSTrument : COUPIe ALL
: INSTrument : COUPIe?
Command type
Response
Function
Example of use
Sequential command
Same as : INSTrument : COUPIe
Makes a query of whether the setting is the same for the transmission and reception.
> : INSTrument : COUPIe?
< ALL
8-7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOUR