Warning a, For safety, Warning – Anritsu MP1777A User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A
For Safety
WARNING
A
ALWAYS refer to the operation manual when working near locations at
which the alert mark shown on the left is attached. If the operation, etc.,
is performed without heeding the advice in the operation manual, there
is a risk of personal injury. In addition, the equipment performance may
be reduced.
Moreover, this alert mark is sometimes used with other marks and de
scriptions indicating other dangers.
2. When supplying power to this equipment, connect the accessory 3-pin
power cord to a 3-pin grounded power outlet, if a grounded 3-pin outlet
is not available, before supplying power to the equipment, use a conver
sion adapter and ground the green wire, or connect the frame ground on
the rear panel of the equipment to ground. If power is supplied without
grounding the equipment, there is a risk of receiving a severe or fatal
electric shock.
Repair
warning
A
3. This equipment cannot be repaired by the user. DO NOT attempt to
open the cabinet or to disassemble internal parts. Only Anritsu-trained
service personnel or staff from your sales representative with a knowl
edge of electrical fire and shock hazards should service this equipment.
There are high-voltage parts in this equipment presenting a risk of se
vere injury or fatal electric shock to untrained personnel. In addition,
there is a risk of damage to precision parts.
4.
This equipm.ent should be used in the correct position. If the cabinet is
Falling Over
turned on its side, etc,, it will be unstable and may be damaged if it fal's
over as a result of receiving a slight mechanical shock.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888)