Anritsu MP1777A - Manual (Page 77)

7.5 Parameter
The table below shows types of parameters used by this measuring instrument
This operation manual expresses parameter types in lowercase characters enclosed by angled brackets ( < and > ) in the
table below.
Moreover, the type corresponding to the parameter type, specified by IEEE488.2 (or SCPI), is
expressed in uppercase characters.
The correspondence between each parameter type and specified by IEEE488.2 (or SCPI) is de­
scribed for each command.
Table 7-1 Details of Parameter Type
Section 7 SCPI Outline
Parameter Type Explanations
PROGRAM DATA>
Expresses a decimal digit. such as MINimum rmd
MAXimum are included as special numerical value type data.
The numerical values used by this device are mainly integer type.
Therefore, the fractional part is rounded.
PROGRAM DATA>
(Defined by SCPI)
Expres.ses a theoretical value.
OFF or 0 corresponds to false and ON or 1 corresponds to true. The setting can be done
by 0 and 1, or OFF and ON. However, the setting for the response to a query must be
done by 0 or 1.
DATA>
Expresses a character string, made of ASCII characters enclosed by single quotation
marks (' ) or double quotation marks ( " ) .
Either long or short form can be used.
Example: 'EOF : M139' or "EOF : Ml39"
, ..etc
PROGRAM DATA>
Expresses a character data. Expressed in a short character string that corresponds to the
setting details
Either the long or short form can be used.
7
-
6
.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com