B.3 initializing device – Anritsu MP1777A User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Appendix B Details of Initialization Command Functions
B.3 Initializing Device
*RST:
Initializes the device. (Common to the GPIB and RS-232C options)
The *RST command switches the device into the following state.
(1) Switches the device-specific functions to the initial state regardless of the past use. On this device,
the command switches the functions to the same state as that when the power switch is turned ON.
(2) Switches the device to the OCIS.
(3) Switches the device to the OQIS.
The *RST command has no effects on the following items.
(1) IEEE488.2 interface state
(2) Device address
(3) Output queue
(4) Service request enable register
(5) Standard event status enable register
(6) Power-on-status-clear flag setting
(7) Structure data to have effects on the device standards
(8) Macro defined by the DMC command
(9) Response message to the PUD query
(10) Response message to the RDT query
(Items 8 to 10 are not supported by this device.)
B-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOUR