Panel indicator lights, Trouble beeps – Interlogix Simon XT Tabletop User Manual User Manual
Page 29
Simon XT TableTop Control Panel User Manual
23
Activity
Beep response
Beep response
Beep response
Interior and panel siren Temporal 3
a
Steady
Fast on/off
Exterior siren
Temporal 3
a
Steady
a> Temporal 3 refers to a continuous pattern of three siren pulses, then off for 1.5 seconds,
three siren pulses, then off for 1.5 seconds.
Panel indicator lights
Use Table 9 below to understand the panel indicator lights.
Table 9: Panel indicator lights
Button
When button light is on
When the button flashes
Doors+Windows
Doors and windows armed Doors and windows armed and no
entry delay on
Motions
Motions armed
Motion sensors armed and latchkey
on
Disarm
System disarmed
System subdisarmed
Status
System trouble, open
sensor, or bypassed
sensor
System in alarm
Enter
There are no open
sensors
Chime - solid bell
Door will cause chime
Special chime - outlines
bell
Motion will cause chime
Light schedules - clock
Time-activated lights
feature enabled
Sensor lights - light bulb
Sensor-activated lights
feature enabled
Latchkey on - key
Latchkey feature enabled
Trouble beeps
Your security system is able to automatically test itself for:
• Power failures
• Low batteries
• Nonworking sensors