Interlogix Simon XT Tabletop User Manual User Manual
Page 18
12
Simon XT TableTop Control Panel User Manual
Exit delay
The exit delay is the amount of time the system gives you to exit the home before
the system is armed. This is programmed by the installer. After you arm the
system you will hear beeps during the exit delay. See Status beeps on page 20.
Silent exit
The silent exit feature silences the status beeps that accompany the exit delay.
See Status beeps on page 20. Press Silent after you arm the system to silence
status beeps. The panel will still beep at the beginning and end of the exit delay.
Note: Enabling silent exit doubles the exit delay time.
Entry delay
The entry delay is the amount of time the system gives you to disarm the system
after entering the home. This is programmed by the installer. When you enter
your home, you will hear beeps during the entry delay. See Status beeps on
page 20.
No entry delay
Use the no delay feature when you are staying at home, for instance when you
are asleep, or when you’re away from home and will carry a wireless touchpad
that will allow you to disarm the system before opening a protected door. Check
with your installer to find out how this option is programmed.
To use the no entry delay, do the following:
1. Close all doors and windows.
2. Press Doors+Windows twice. If a code is required for arming, enter your code
after the first press of the Doors+Windows button, then press the button
again.
3. The panel displays Doors+Windows - No Delay and speaks Doors and
windows on, no entry delay. The Doors+Windows light will blink and the exit
delay will begin.
Note: To avoid causing an alarm, you must disarm the system with a wireless
touchpad before entering your home.
Quick exit
Use the quick exit feature when someone wants to briefly leave while the home is
still armed (for instance to get the newspaper). This feature needs to be enabled
by your installer. When you press the Disarm button, the display shows Exit Time
Is On. This allows a designated exit door to be open for up to two minutes
without triggering an alarm.