How to set for one-touch dials – Brother FAX-2000P User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
storing Frequently Used Communication
Modes Under One-touch Program Keys
FAX-2000P has 6 one-touch program keys {P1-P6) which can be used
as one-touch dial and/or program keys for communication mode.
If used as one-touch dial, these keys can store the following items which
are the same as those for one-touch keys 01 to 24:
• Facsimile Number
• Party's Name
• Group Number(s) used for Broadcasting and Sequential Polling
If used as program keys for communication mode, the following modes
can be stored:
• Transmission (or Delayed Transmission)
• Broadcasting (or Delayed Broadcasting)
• Mailbox Transmission (Confidential Communication)
• Polling (or Delayed Polling)
• Sequential Polling (or Delayed Sequential Polling)
[] Both of one-touch dialing and communication mode can be stored
in a single one-touch program key. in this case, the key operates
for one-touch dialing when the key is pressed for specifying a
destination in a setting display of delayed transmission,
broadcasting, confidential (mailbox) transmission, polling or
sequential polling.
How to Set for One-touch Dials
In standby mode, press FUNCTION, 1, 0 and ENTER.
11
1 0 . P r o g r a m O n e - t o u c h
0 1 - 1 2 E n t e r / S e l e c t
1 . E n t e r O n e - t o u c h
1 - 5 E n t e r / S e l e c t
2
After this, perform the same procedures as for one-touch
dials (01-24) given on the previous pages.
49