How to set the redial count, In standby status, press function, 0,9 and enter, Press 1,2 and enter – Brother FAX-2000P User Manual
Page 127: How to set the redial interval, In standby mode, press function, 0,9 and enter, Press 1,3 and enter, Howto set the redial interval, Parameters for dialing and ringing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parameters for Dialing and Ringing
How to Set the Redial Count
The number of redials for line busy or no response from the other party
can be set as follows. Settable counts are 2 to 5 redials.
In standby status, press FUNCTION, 0,9 and ENTER.
Press 1,2 and ENTER.
Enter the number using the keypad, then press ENTER.
How to Set the Redial Interval
The interval for redialing for line busy or no response from the party can
be set as follows. Settable time is 3 to 5 minutes.
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
12.Set # of Redials
01 -25 Enter/Sel ect
Set # of Redia 1s
(2-5)
2
In standby mode, press FUNCTION, 0,9 and ENTER.
Press 1,3 and ENTER.
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
13.Set Redial Inter
01-25 Enter/Select
Enter the interval using the keypad, then press ENTER.
Set Redial Inter.
(3-5)
3
115