Parameters for dialing and ringing, How to set the number of rings, In standby mode, press function, 0,9 and enter – Brother FAX-2000P User Manual
Page 126: Press 0,7 and enter, Enter the number (2-6), then press enter, How to set auto/manual reception mode switching, Howto set the number of rings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parameters for Dialing and Ringing
How to Set the Number of Rings
The number of rings before line capture in the automatic reception
modes can be set as follows:
il
2
In Standby mode, press FUNCTION, 0,9 and ENTER.
Press 0,7 and ENTER.
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
7.Set # of Rings
01-25 Enter/Select
^ Enter the number (2-6), then press ENTER.
How to Set Auto/Manual Reception Mode Switching
Automatic reception (Fax Ready) and manual reception (Tel Ready) can
be switched automatically during daytime hours by using a timer.
i]
Si
114
In Standby mode, press FUNCTION, 0,9 and ENTER.
Press 0,6 and ENTER.
Enter the time to start the automatic reception mode,
then press ENTER.
Enter the time to stop the automatic reception mode,
then press ENTER.
(®) To de-activate the switching function, specify both
start time and stop time as 00:00.
Set // of Rings
(2-6)
2
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
6. Set Auto Rx Time
01-25 Enter/Select
Set Auto Rx Time
Start Time:
00:00
Set Auto Rx Time
End Time:
00:00