How to set the scanning width, In standby mode, press function, 0,9 and enter, Press 0,9 and enter – Brother FAX-2000P User Manual
Page 129: How to set the home position for resolution, Press 1,0 and enter, Parameters for image scanning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Parameters for Image Scanning
How to Set the Scanning Width
Scanning width affects the reduction of documents that are wider than
8.5" (or A4). If the scanning width is changed to A4, large documents
will not be reduced. Documents wider than 8.5" (or A4) will be clipped
left and right.
n
In standby mode, press FUNCTION, 0,9 and ENTER.
Press 0,9 and ENTER.
Select B4 or A4 using the SELECT key, then press
ENTER.
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
9.Set Scanner Width
01-25 Enter/Select
Scanning Size: B4
Enter/Select
How to Set the Home Position for Resolution
Change the initial resolution condition displayed in the LCD from Norm
to Fine.
In standby mode, press FUNCTION, 0,9 and ENTER.
Press 1,0 and ENTER.
Select Norm(al) or Fine using the SELECT key, then press
ENTER.
9.User Settings
01-12 Enter/Select
l.Set Phone Type
01-25 Enter/Select
10.Primary Resol.
01-25 Enter/Select
Primary Resol :Nonn
Enter/Select
117