Brother FAX-2000P - Manual (Page 147)

Cleaning Recording Unit
CAUTION; To dean the recording unit, be sure the power is off, the remove the drum unit, the toner until
and the toner waste bottle. When re-installing the drum, be sure to re-lock the drum’s
protective cover. If this cover is not locked back in the open position before re-insertion,
serious damage may result to the drum or to other machine components.
• Paper guide plates
Located beneath the drum unit.
Clean w itti cleaniny yayei.
• Upper/lower guide plates
Located beneath the drum unit.
Lift the upper paper guide and clean the
upp/lower guides with cleaning paper.
• Transfer corona wire
Located beneath the drum unit.
Insert the process cleaner into the groove
an lU yently move it back and forth.
I Toner unit Using the Toner Cleaner
■Toner cleaner
MeTal'plate
Insert the Toner Cleaner between the roller surface and
metal plate at the location where there is a relatively
light coating of toner. Move the Toner Cleaner in and
out, left and right about two or three times.
Drum set
(Charging corona wire)
Clean the charging corona wire with the
cleaner by sliding it lightly on the wire.
135