AquaCraft Top Speed 3 - Manual (Page 20)

20
Squeeze the throttle trigger on the transmitter as well
as push the throttle barrel into the full throttle position.
Snug the set screw on the screw lock connector.
Release the throttle trigger and the carburetor
barrel should go to high idle.
Push the throttle trigger forward and the carburetor
barrel should FULLY close. Make any necessary small
adjustments to make sure that the barrel FULLY closes.
Hook up your fuel and pressure line using the picture
for reference. The use of a fuel fi lter is not required
but is recommended for the fi rst few runs.
Carburetor Closed
Carburetor Partially Open (Idle)
Carburetor Fully Open