AquaCraft Top Speed 3 - Manual (Page 14)

14
Although not necessary, we recommend tack gluing
the radio box into the boat with a few small dabs
of household cement or silicone sealer.
Install the steering rods onto the engine by
snapping the ball link over the metal ball.
Slip the lock collars over the long rods and then back
over the short rods protruding from the radio box. Snug
the lock collars in place. We will make fi nal adjustments
to the steering rods in the setup part of the manual.
Slip the white outer housing in the clamping portion of the
cable clamp and snug the other housing in place. If you
fi nd the cable is not held well, you can carefully sand some
of the thickness of the upper portion of the clamp to allow
better clamping. (Do not overtighten the clamp screw).