AquaCraft Top Speed 3 - Manual (Page 17)

17
If your receiver has an external antenna you can use
the include antenna to extend it from the radio box.
Drill a 1/4" hole approximately 1" from one end of the
radio box lid and install the antenna using a dab of
silicone between the hole and the base mount.
GrimRacer Says: If you are using a
2.4GHz radio system you can shorten
the antenna tube to 5" long. Do not drill
a hole in the top of the cowl but rather allow the antenna
to gently bend under the cowl for a neat and clean look.
Glue the plastic washers on the cowl. Use a
small amount of CA to hold them in place.