Industrial Data Systems IDS Scale Basic - Manual (Page 35)

Scale Basic 4.2E Reference
Remarks: this instruction takes a minimum of 3 A/D conversion cycles. Press the Clear key to
abort Valid wt command; also aborts the scale basic function using this instruction, and all
calling functions (unwinds subroutine stack).
Example:
Valid wt wait for valid weight. Abort all if Clear key pressed.
Gosub Print1 print format 1
Write id 228
Purpose: write ID data back to ID memory.
Remarks: ID data is read into the ID registers by the Make id, Get id, and Index id instructions
or by the Open id, Open new, Read first, and Read next functions. If any ID data is modified,
it must be written back to ID memory to make the change permanent. The ID registers are
cleared after a Write id instruction.
Example: Get an ID number from the keyboard, open/make the ID, get tare from keyboard, save
the data.
Get data, Memory1 Get an ID number from the keyboard
If not, Clear key If NOT Clear key
Make id, Memory1 Open/Make ID
Get data, Id2 put keyboard tare into ID register 2
Write id Save ID data
End if End if
End End of function