Panasonic SC-DT300 - Manual (Page 25)

CH SELECT
TEST
SHIFT
A , ▼
□□PL
SUBWOOFER
LEVEL
D.MIX
DOLBY DIGITAL and DTS
Play a DOLBY DIGITAL or DTS source.
The unit automatically determines the type of signal and processes
it.
To add power to the bass from the subwoofer * page 26.
To down-mix Dolby Digital or DTS (5.1 ch) signals to
2 channels
Press [SHIFT]+[D.MIX] during play.
To cancel, press [SHIFT]+[D.MIX] again.
When “D.MIX” is flashing
The DVD-Audio disc you are playing contains multiple-channel sig­
nals that cannot be down-mixed {“No Down-Mix" also appears).
DOLBY PRO LOGIC
1
Press [naPL].
2
Play a Dolby Surround source.
□□ plt - Lights up
To cancel
Press [□□PL],
Turn Dolby Pro Logic off when playing a DVD recorded with Dolby
Digital or DTS. The surround effects will not be reproduced correctly
if this is left on.
Speaker level adjustments
If the level of the speakers appears to be different white listening to a
source, adjust the level of the speakers to the same apparent level.
Preparation
DOLBY DIGITAL and DTS: Turn off the other surround systems.
DOLBY PRO LOGIC:
Press [□□PL].
® Press [SHIFT]+[TEST] to output a test signal.
TEST Lch
Lch: Front left
Cch: Center
Rch: Front right
RSch: Right surround
LSch: Left surround
•The surround channel for Dolby Pro Logic is monaural so the
indicator appears as “Sch" instead.
® Press [ A ] (to increase) or [ T ] (to decrease).
To stop the test signal, press [SHIFT]-i-[TEST] again.
To adjust speaker level during play
© Press [SHIFT]+[CH SELECT] to select the speaker.
Lch—Cch—»■ Rch-* RSch-» LSch-»SWch
to
c .0
A
2
1
2
.«>
•o
C
3
0
1
1
o-
T)
§
«
SWch: Subwoofer
Dolby Pro Logic
•The surround channel is monaural so the indicator appears as
“Sch” instead.
•“SWch" does not appear.
@ Press [A](to increase) or [V] (to decrease).
L, R:-16dB toOdB
C, RS, LS, S:-10dB to-)-6dB
SW:-10dBto+10dB
You can also adjust subwoofer level by pressing [SUBWOOFER
LEVEL] (^ page 26).
RQT6534