Panasonic SC-DT300 - Manual (Page 23)

The radio; preset tuning
TUNER/BAND
Numbered
buttons
VOLUME
+
There are two methods of presetting stations.
Automatic presetting: The stations the tuner can receive are
preset.
Manual presetting; You can select the stations to preset and
the order they are preset in.
Up to 39 stations can each be set in the FM and AM bands.
Automatic presetting
Tune to “FM 87.9’
page 22).
(or “FM 87.5”)
FM 87.9
3
4
Press and hold [ENTER/SET].
The FM stations the unit can receive are preset.
Release the button when “AUTO MEMORY” appears.
Tune to “AM 520”.
Press and hold [ENTER/SET].
The AM stations the unit can receive are preset.
Release the button when “AUTO MEMORY” appears.
The tuner presets all the stations it can receive into the channels in
ascending order. FM and AM stations are preset into channels 1 to
39.
“SET OK” is shown when presetting is complete and the last station
to be preset is played.
“ERROR” is displayed if the tuner doesn't receive any stations. Do
presetting manually if this happens (see below).
Manual presetting
V)
.§
t
0)
&
o
■5
ic
Preset the stations one at a time.
1
2
Tune to the station page 22).
Press [ENTER/SET].
ME-CH-
y \
3
4
Press
[A,T]
to select a channel.
Press [ENTER/SET].
The station occupying a channel is erased if another station is preset
in that channel.
Selecting channels
1
Press [TUNER/BAND] to select “FM’
or “AM”.
Each time you press the button:
FM^AM
Press the numbered buttons to select
the channel.
To select a 2-digit number
Example: To select channel 12, press [^10, ENTER] ■* [1]
-12]
2 FM 87.9
Channel
Adjust the volume.