Simple setup, Simple setup dfëpç selecting tv screen type, Dt300 itilim t – Panasonic SC-DT300 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Simple setup
dfËpÇ Selecting TV screen type
3
DT300 ItiliM
t
o
O)
-Si
.1
to
RETURN
Change the setting to suit your television.
The menu language is set to English, but you can change it
page 28, Display—Menu Language). English is used in
the examples.
Preparation
Turn on the television and select the appropriate video input on
the television to suit the connections for the unit.
1
Press [SYSTEMcb] to turn on the
unit.
2
Press [DVD/CD] to select “DVD”.
Press [SHIFT]+[ACTION] to show
the menus.
Panasonic
1 Ï f3i 1 11
ACTION Disc
[ Audio
t Entillsh 1
1 Subtitle
[„AMtcmatie !
I Menus
1 English 1
saKT
j Ratings
[■■UyetSigJ
4
Press [◄, ►] to select the “Video”
tab.
5
Press [A, T] to select “TV Aspect”
and press [ENTER/SET].
6
Press [A, T] to select the item and
press [ENTER/SET].
•4:3 Pan&Scan (Factory preset)
Select if you have a regular
television and to view 16:9 software
in thé pan and scan style.
16:9 software prohibited from being shown in the pan
and scan style will appear in the letterbox style de
spite the setting here.
•4:3 Letterbox
Select if you have a regular
television and to view 16:9 software
in the letterbox style.
• 16:9
Select if you have a widescreen (16:9) television.
Use the television’s screen modes to change the way the
picture is shown.
7
Press [SHIFT]+[ACTION] to end the
settings.
To return to the previous screen
Press [RETURN].
■ When viewing video made for a standard 4:3
aspect teievision on a wide 16:9 aspect
teievision using progressive output
This unit shows the correct aspect when playing wide 16:9 as
pect software, but when showing standard 4:3 aspect software,
the picture is stretched horizontally to fill the screen.
• If your television can change the aspect when input is
progressive
Use the television to change the aspect to the correct one.
• If your television cannot change the aspect when input is
progressive
Press [SHIFT]+(PR0GRESS1VE] so the “PROGRESSIVE"
ihdicator goes out. Output will now be interlace.
NOTE
This unit does not output video signals from the VIDEO
OUT
and
S-VIDEO
OUT
terminals
when
the
“PROGRESSIVE” indicator is on.
RЫT6534