Baseline Systems BaseStation 3200 V12 - Manual (Page 12)

BaseStation 3200 V12 Quick Start Guide
Page 8
Selecting daily water windows gives you hourly control of watering for each day of the week
and for each program.
5. Press the Next button to move to the Day of the Week field. If you are using the “Weekly”
Water Window Type, you cannot change the setting in this field, but if you are using “Daily,”
press the + or – button to display the day of the week that you want to set up water windows
for.
6. Press the Next button to move to the ON/OFF field.
 If the boxes in the grid are blue (allow watering), the field displays OFF. Press the Enter
button to turn all the water windows off.
 If the boxes in the grid are white (do not allow watering), the field displays ON. Press the
Enter button to turn all the water windows on.
7. To make changes to the individual boxes in the grid, press the Next button. The color of the
number in the first box of the grid changes to red (indicating that you can change the setting
in that box).
 To change the water setting for the time/day represented by that grid, press the +
button.
 To move to next box in the grid, press the Next button.
Note: If you want to set up daily water windows, start by setting a basic profile in weekly
mode, and then change to daily mode to modify specific days (like a mow day). Pressing the
Enter button will maintain the current selected field and advance through the days of the
week.
STEP 6 – Set the Controller to RUN
Turn the dial to the RUN position. Watering will start when the next start day and time is reached.
Forcing a Program to Start
1. Turn the dial to the Manual position.
2. Press the Next button to highlight the Start or Stop Program(s) option.
3. Press the Enter button. The Prog Start/Stop
screen displays.
4. In the Program/Status column, press the +
button to highlight an idle or paused program
that you want to start.
5. Press the Next button to move to the
Start/Stop column. The field in this column
displays Start.
6. Press the + button. The field in the Start/Stop
column displays Stop, and the program’s status
changes to Watering.
7. Turn the dial to the RUN position.