Baseline Systems BaseStation 3200 V12 - Manual (Page 10)

BaseStation 3200 V12 Quick Start Guide
Page 6
7. Press the Next button to move to the Flow field. If you know the gallons per minute flow for
this zone, you can press the + or – button to enter it in this field. You can also perform a Learn
Flow operation to update this field. Refer to Learning Flow by Zone in the User Manual.
8. Press the Next button to move to the Enabled field. Press the + or – button to display YES in
the field.
9. The number in the Program field in the upper-left corner of the screen indicates what
program these zone settings are for. For the purpose of this quick start, make sure the zone
settings are for program 1. Refer to the Zone Settings topic in the User Manual for more
information about configuring zones in various programs.
Note: To move to the Program field, press the Next or Previous button.
10. After you have configured the settings for the current zone, you can configure another zone
by pressing the Enter button until the number of the zone that you want to configure displays
in the Zone field at the top of the screen. Repeat steps 3 – 9.
STEP 5 – Set Up Programs
Setting Up the Start Times for a Program
1. Turn the dial to the Programs position.
2. The Program Start Times Setup option should
be highlighted. If it is not highlighted, press the
Next button to highlight it.
3. Press the Enter button. The Start Times screen
displays.
4. Verify that the number displayed in the
Program field matches the program that you
want to set start times for. If you want to select
a different program, press the + or – button to
change the program number.
5. Press the Next button to move to the start
times grid.
6. Press the + or – button to set the time in the first cell.
7. Press the Next button to move to the next cell in the start times grid, and then press the + or
– button to set additional start times as needed.
8. After you have configured the start times for the current program, perform one of the
following actions:
 To configure start times for another program, press the Enter button until the number
of the program that you want to configure displays in the Program field at the top of the
screen. Repeat steps 5 – 7.
 When you have finished making changes, turn the dial to the RUN position.