Wheatheart S2000 Post Pounder - Manual (Page 32)

3. A SSEMBLY W HEATHEART - P OST P OUNDER
3.3. I NSTALLING THE PTO K IT S2000 M ODEL
32 IM15 R1
3.3.3. I
NSTALLING THE
PTO P
UMP
S
UPPORT
1. Facing the three-point hitch, position the PTO pump support on the frame
assembly with the U-bolt centre three inches to the right of the edge of the
hitch centre-post (Figure 3.9 shows the mounting location).
2. Secure the PTO Pump support to the frame assembly using the U-bolt and
two 1/2” nylock nuts.
Figure 3.13 Installing the PTO Pump Support
PTO PUMP
U-BOLT
1/2” NYLOCK NUTS
THREE-POINT HITCH
CENTRE POST
SUPPORT