IPitomy IP550 User Manual Ver.1 User Manual

Page 7

Text mode
Original mode

IPitomy Confidential 2

Chapter

Chapter 2

Installation

This Chapter covers the physical installation of the IP Phone.

Requirements

• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• For Internet Access, an Internet Access account from ISPs, and either a DSL or Cable

modem is required.

Procedure

1. Connect the Handset

Connect the handset to the jack on the left-hand side of the IP phone.

2. Connect to the Network

Use standard Ethernet cable to connect the network to the "LAN" port on the IP Phone.
Connect your PC to the "PC" port on the back of the IP Phone, as shown in the diagram
below.

3. Power Up

Connect the supplied power adapter to the IP Phone and power up.
Use only the power adapter provided. Using a different one may cause hardware damage.

Figure 1: Connecting IP Phone and Your PC