Mmi specifications, Appendix – IPitomy IP550 User Manual Ver.1 User Manual
Page 44

IPitomy Confidential 39
Appendix
Appendix
Appendix
Appendix C
C
C
C
MMI Specifications
MMI Specifications
MMI Specifications
MMI Specifications
1. Display Rule
1. Display Rule
1. Display Rule
1. Display Rule
LCM visual space has 128x64 pixels and one line of icons. Each character is designed to use 8x6 pixels. Totally
LCM display area can afford 8 lines and 21 characters per line.
Icons Icons show some specific status of the phone, including No Service for registration
information, DND for Do not disturb, Forward for call forwarding, Conference for
3-way conference, & Voicemail for indicating voice mail existence.
Line 1~5
Lin1~5 are for showing the phone states, and call information. Phone states include
network status and time information. Call information includes the outgo-
ing/incoming call information and the registration line information.
Line 6~8
Line 6~8 are for operations of soft keys. Two type of soft key are contained in
SP550, pre-defined and state-based soft key. Predefined keys are fixed name/value
in SP550. User could define up to 20 sets of state-based soft key.
1.1 Idle Display
During idle state, Screen name and the extension number of a line are shown on line 1. SIP Line1~4 could be
switched by left/right navigation keypad. Network link status is shown on line 2 and a LED on the top. If phone
connects to network successfully, message “Network Connected” should be displayed on line 2 for Ethernet
link status. Date/Time information is shown on line 4.
Idle state:
No
Serv
DND FWD
L1 5555 Louis
Network Connected
Sat Jan 1 3:00
Comment: