2 state-based soft keys – IPitomy IP550 User Manual Ver.1 User Manual
Page 113

IPitomy Confidential 108
4.2 State-Based Soft Keys
On SP550 soft keys, user can configure a specific state to display when a soft key is being used. Available states
you can configure for each soft key include:
Idle
Connected
Incoming
Outgoing
The following table identifies the applicable default states for each soft keys type on the IP phone.
Soft key type
Default States
None
All states disabled
Speed dial
Idle, connected, incoming, outgoing,
Do Not Disturb (DND)
Idle, connected, incoming, outgoing,
BLF
Idle, connected, incoming, outgoing,
Last Call Return (LCR)
Idle,
Park
Connected,
Call retrieve
Idle,
Call pickup
Idle, incoming,
Intercom
Idle, outgoing
Prefix
Idle, connected,
Table 4.1