Hale AutoFill-E Tank Refill Control System - Manual (Page 9)

9 AUTOFIll-E Installer / User Guide
p/n: 029-0020-81-0
Introduction
❑
2 Description
The Hale AUTOFILL-E (Electric) Tank Refill Control System is a completely inte-
grated and engineered system comprising of both Class 1 and Hale Products.
The Class 1 “Driver Module” (p/n: 106877) is designed to output a “Fill Required”
signal when the tank drops to 75% of FULL and to shut down the fill when the tank
is within one-eighth of full capacity. The Intelli-Tank 4-LED Light Gauge and Alarm
notify the operator of the tanks condition. The light gauge displays the liquid vol-
ume to one-eighth of a tank level accuracy, through 180° viewable ultra-bright
LEDs.
2.1 HALE VALVE ACTUATOR SYSTEM (SVS)
(See Figure 2-1: “SVS Valve Control.”)
This system auto-
matically (or manu-
ally) OPENS and
CLOSES the SVS
control valve. When
engaged, a gear
driven motor oper-
ates the valve to
activate flow
through the AUTO-
FILL System.
When the system
reaches an opti-
mum level, the Hale
Valve Actuator Sys-
tem engages the
motor to CLOSE the
valve.
Also see separate manual, Hale p/n: 029-0020- 90-0, for additional SVS
valve information.
Figure 2-1: SVS Valve Control