7 fax settings - header/footer position, 8 fax settings - line parameter setting (ip), Number of redials – Konica Minolta bizhub 552 User Manual

Page 239: Redial interval, 9 fax settings - tx/rx settings, 10 fax settings - function settings, Memory rx setting, Forward tx setting, Fax settings - header/footer position -34, Fax settings - tx/rx settings -34

bizhub 652/552

10-34

10.5

Administrator Settings (IP/I-FAX)

10.5.7

Fax Settings - Header/Footer Position

Reference

For IP Address Fax in the color mode, reception information is not available for [Outside Body Text].
Even if [Outside Body Text] is selected, sender information is added to the inside of the original.

Reference

For the setting procedure, refer to page 10-15.

10.5.8

Fax Settings - Line Parameter Setting (IP)

Number of Redials

Reference

For the setting procedure, refer to page 10-17.

Redial Interval

Reference

For the setting procedure, refer to page 10-17.

10.5.9

Fax Settings - TX/RX Settings

Reference

To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to [Auto].

The available tray types vary depending on the options that are installed.

To receive a fax in the color mode, documents are always recorded in full size for IP address fax, and
recorded after being reduced to the appropriate print paper size for Internet fax. These faxes are printed
in black and white.

To receive a fax in the color mode, Print Separate Fax Pages cannot be used.

Reference

For the setting procedure, refer to page 10-19.

10.5.10

Fax Settings - Function Settings

Function ON/OFF Setting - Destination Check Display Function

Reference

For the setting procedure, refer to page 10-21.

Memory RX Setting

Reference

For the setting procedure, refer to page 10-22.

Forward TX Setting

Reference

For the setting procedure, refer to page 10-23.

This manual is related to the following products:

bizhub 652