Konica Minolta bizhub 552 - Manual (Page 194)

bizhub 652/552 9-16
9.2 One-Touch/User Box Registration 9
Reference
- To check a registered destination, select its registered name, and then press [Check Job Set.].
- To change the settings for a registered destination, select its registered name, and then press [Edit].
- To delete a registered destination, select its registered name, and then press [Delete].
9.2.8 Address Book - IP Address Fax
Register IP address fax destinations. To register a new destination, press [New].
1/2 page
2/2 page
[Icon] Select an icon.
•
The selected icon is used for the image panel function that is available
when the optional function code "CAA" is enabled.
Item Description
Item Description
[No.] Press [No.], and then enter the registration number of the destination be-
tween 1 and 2,000. Press [OK] without entering any number to register the
smallest number available.
[Name] Use the touch panel to enter the name to be registered in the address book
using up to 24 characters.
[Destination] Enter the host name, IPv4 address, IPv6 address or E-mail address as the
host address for the destination device.
The host name or E-mail address must be less than 317 characters in length.
•
If you enter a host name and then select to enter an IP address, the host
name is cleared.
• Before entering the host name or E-mail address, check that the DNS set-
tings are correctly specified. For details, refer to the [User's Guide Net-
work Administrator].