4 administrator settings (g3), 1 system settings - power save settings, Administrator settings (g3) -13 – Konica Minolta bizhub 552 User Manual
Page 218: System settings - power save settings -13, Mode] (p. 10-13), Fax] (p. 10-13)
bizhub 652/552
10-13
10.4
Administrator Settings (G3)
10
10.4
Administrator Settings (G3)
This section describes administrator settings that are configured for G3 Fax TX. The descriptions in this sec-
tion also apply to Network Fax.
10.4.1
System Settings - Power Save Settings
Select the condition on which the machine shifts to the power save mode.
10.4.2
System Settings - Output Settings - Print/Fax Output Settings - Fax
Specify the printing method for RX documents.
-
[Batch Print] (default): Printing is started after all documents are received.
-
[Page Print]: Printing is made each time a page of document is received.
Item
Description
[Enter Power Save
Mode]
Select the condition on which the machine shifts to the power save mode.
•
[Normal]: When a fax is received during the power save mode, the fax job
is printed. After a predetermined time has elapsed, the machine shifts to
the power save mode.
•
[Immediately] (default): When a fax is received during the power save
mode, the fax job is printed and then the machine immediately shifts to
the power save mode.