Pc-fax rx settings, Tsi user box setting, Pc-fax rx settings -25 tsi user box setting -25 – Konica Minolta bizhub 552 User Manual

Page 230: Ting] (p. 10-25), Ing] (p. 10-25)

bizhub 652/552

10-25

10.4

Administrator Settings (G3)

PC-Fax RX Settings

Specify whether to use the PC-Fax RX function. To use the function, configure the following items.

If two units of the Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Admin-
istrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line. For details
on [Individual Receiving Line Setup], refer to page 10-19.

Reference

The documents received by fax are saved in the TIFF format in a User Box.

Reference

For details on PC-Fax RX, refer to page 7-4.

TSI User Box Setting

Specify whether to use the TSI User Box function. To use the function, configure the following items.

If two units of Fax Kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in Adminis-
trator Settings, you can select either [Fax Line 1] or [Fax Line 2] to specify the forward destination setting for
each receiving line. For details on [Individual Receiving Line Setup], refer to page 10-19.

Reference

For details on the TSI User Box function, refer to page 7-5.

Item

Description

[Receiving User Box
Destination]

You can specify destinations in a Memory RX User Box or a Specified User
Box. If [Specified User Box] is selected, destinations are saved in a User Box
specified with an F code subaddress.

[Print]

Specify whether to print a fax after receiving.

[Password Check]

Specify a communication password (up to 7 digits).

This manual is related to the following products:

bizhub 652