Konica Minolta bizhub 552 - Manual (Page 110)

bizhub 652/552 5-56
5.11 Original Settings 5
5.11.5 Direction Settings - Binding Position
Select the binding position of the original when it has punched holes or is stapled. This adjusts the scan of
double-sided originals so that the binding position is not reversed.
5.11.6 Total # of Pages (Quick Memory TX) (G3)
If the quick memory transmission is performed, the total number of pages are automatically printed in [No. of
Pages] of the transmission source information in the format of "P. Page Number/Total pages". Select Quick
Memory TX, and then press [Total # of Pages (Quick Memory TX)], and enter the number of original pages
using the keypad.
This function cannot be used together with the following functions.
- Memory TX
- Cover + 2-Sided (Scan Settings - Simplex/Duplex)
- Frame Erase
- Book Copy
- Scan Size
- Mixed Original
- Polling TX
- Polling RX
- Bulletin board
- Timer TX
Item Description
[Auto] Sets the binding position to the long side if the size is 11-11/16 inches (297
mm) or smaller, or the short side otherwise.
[Top] Original with the page margin at the top
[Left] Original with the page margin at the left