Kramer Electronics PL-50 - Manual (Page 30)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the PL-50 Power Controller - Monitor
26
6.3.8.1 The Security System
Set the user password and Admin password 1
The security system includes three levels of security:
(by default, the passwords for
both User and Admin are empty fields).
• Pre-authorized mode (the security box is checked) – the Web pages are
disabled and you have to enter either the User or Admin password to
access the system (see Figure 28 )
• User mode – monitor the system and switch outlets ON or OFF
• Admin mode – control the system and change any of the parameters
Figure 28: User Login
At any time you can log out by clicking the Log Out button on the top right
side of the Web page (see Figure 27 ).
HELP BOX
Please log in as USER or ADMIN.
1 Both the Admin and the User passwords are reset to their default values when pressing the reset button located on the rear
panel of the machine (see
Figure 2 and Figure 3 ) and plugging the power ON while pressing