In-Situ Tube 300R Telemetry System - Manual (Page 5)

800-446-7488 5 www.in-situ.com
Introduction
This manual is intended to describe the characteristics, operation, and maintenance of
the Tube 300R Telemetry System.
Unpacking and Inspection
All Tube 300 Telemetry Systems contain the following items:
l
Tube 300R unit
l
Lithium battery pack
l
Stub antenna
You need to supply the following items for setup and installation:
l
Tube setup/communication cable (part number 0062260)
l
In-Situ Inc. instrument and appropriate cable
l
TROLL Com Communication Device for connecting your In-Situ Inc. instrument to
your computer
l
Tube 300R in-well bail (optional - part number 0060240) to deploy the Tube
inside of the well casing
l
Win-Situ 5 Software* for programming your In-Situ Inc. instrument
* Software can be installed from an In-Situ software CD or downloaded from www.in-situ.com/software
If you did not purchase a SIM card and data plan from In-Situ Inc., you'll need these
additional items:
l
SIM card
l
Cellular service plan
Your Tube Telemetry System was carefully inspected before shipping. Inspect the
package for any physical damage sustained during shipment. Notify In-Situ Inc. and file
a claim with the carriers involved if there is any damage. Do not attempt to operate the
instrument when damage has occurred.
Model Number
The model number is printed on the product label affixed to the unit body. The model
number states what type of unit you have. Below is an example model number.