Trouble shooting air spinmaster – Hawk Industries Spinner Manual 550 HYDRAULIC Serial Numbers 1 to 205 User Manual
Page 47

47
Trouble Shooting Air Spinmaster
Troubleshooting
The Spinmaster motor valve needs repair. The seals
and/or spool return spring need replacement. See
Drawings pg.72.
The Spinmaster motor valve needs repair. Check
that the handle assembly is free to pivot. See
Drawings pg.72.
The Spinmaster air motors and mufflers are freezing
causing reduced performance. Remove lubricator
oil from the lubricator bowl and replace with a
quality automotive antifreeze. Adjust the air
Lubricator drip to a setting that will reduce the
freezing tendencies of the air. See Air Lubricator
Adjustment pg32.
Symptom
Remedy
The Spinmaster Chain Creeps
After the Motor Valve is shifted
Off.
Warning
Chain Creep Can Cause injury.
The Spinmaster performance in
cold weather is not up to par.