Hawk Industries Spinner Manual 550 HYDRAULIC Serial Numbers 1 to 205 - Manual (Page 31)

31 Maintenance & Repair
Air Power Pack Maintenance
SG
FP
1. Check oil level at least once per
day using oil level sight gage
(SG) .
2. To add oil to the air lubricator,
remove filler plug (FP).
3. Use a small funnel and fill
lubricator with #10 wt. pneu-
matic oil up to the filler cap.
4. Replace filler cap.
The Air Spinmaster air
motors (Main Motor &
Power Pack Motor) must be
lubricated to provide de-
pendable service. Air
motors will rust up on the
inside and lock up if not
lubricated.
WARNING
Filling Air Lubricator