Hawk Industries Hawkjaw Sr. Manual M100K-2GSR Serial Numbers 201 to 370 - Manual (Page 12)

Hanging Cable Requirements Hanging Cable Requirements
1. 5/8" diameter steel cable.
2. Appropriate hanging cable hardware for
5/8" diameter steel cable.
3. Enough cable length to suspend the
Hanger Eye (HE) 20' ft. above the rig floor.
4. Enough cable length to allow the HawkJaw
to rest on the rig floor 3'- 5' ft. away from
the rotary table with the lift cylinder com
pletely stroked out. The lift cylinder is 13' ft.
long when completely stroked out.
10 Installation
HE